Ghost Immobiliser Fitting
Protect your vehicle from key theft hacking, cloning and theft by using the world's first aftermarket immobiliser for CAN. With the additional option to link to an Ghost app and GPS tracking system that can send you call alerts if your car is tampered with or stolen.
The installation of a Ghost immobiliser can be completed by a qualified technician. It is crucial to have the right equipment and heat shrink tubing.
Getting Started
Ghost immobilisers can be a great alternative to physical theft protection devices like car alarms and wheel locks. They protect your vehicle without the use of LED indicators or key fobs. They are directly connected to the ECU CAN data network, and are activated only by entering a PIN code. This provides a more secure level of protection against key hacking, cloning and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham has to be done with great agility and accuracy. It's like navigating the minefield. A single mistake could cause irreparable damage to the circuits of your vehicle's electrical system. To avoid this, it's essential that you understand the process of installation and prepare your vehicle accordingly.
First, you must prepare the vehicle by taking out interior panels to allow for the immobiliser device. Once ghost install 've located the perfect place to conceal it and secure it with cable ties to keep it from being removed or damaged. Next, tidy up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover the exposed connections. This can help minimize the risk of short circuits that are not intended to be there as well as improving aesthetics and reducing the likelihood of tampering by thieves.
Identify a constant source of 12V power, as well as a grounding source for the ghost immobiliser. Once you've found these, test the power wires with a multimeter to make sure they are delivering a consistent voltage. Finally, connect the CAN H and L wires from the immobiliser to your chosen power source and grounding point.
It is essential to ensure that all connections are checked and examine the immobiliser to check for indications of corrosion. Entering a PIN and starting the vehicle is a great method of testing the system. This should be an integral part of your routine, as it will help to identify any issues that may be occurring early on. Regular testing will help extend the life of your device, and keep it performing at its best.
Preparing your vehicle
Installing a Ghost immobiliser requires expertise and tools. A wiring diagram is necessary to identify the right wires, making precise connections and ensuring safety. A multimeter can be used to check the electrical properties and ensure security. Cable ties and insulation tape can be used to shield the connections from damage and to keep them neatly secured. Finally, a user manual will provide specific guidance specific to your Ghost Immobiliser model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the driver to input a unique PIN code sequence by pressing buttons on the steering wheel or on the centre console. The code can be changed at any time by the vehicle owner, either manually or remotely through an app on mobile. The device is also silent and undetectable by thieves, since it doesn't emit any radio frequencies.
Ghost immobilisers connect directly to the vehicle's CAN bus. It is a network that communicates with all the vehicle's electronic control units (ECUs). It intercepts signals from the ECUs and prevents the engine from running if the ECU detects a false signal. The system is weatherproof and tamperproof. It doesn't have any keys or LED indicators that could draw thieves' attention.
It can be positioned behind or in a more obscure area so that it's not easily spotted by thieves and does not interfere with vehicle performance. It can be tucked away in a small container so it is less likely to be noticed by untrustworthy salespeople during a test drive.
Its sly operation, coupled with its integration into the vehicle's CAN-bus system, makes it a powerful deterrent to modern car theft methods like signal relay attacks and key cloning. The system can be integrated with other security measures to create a powerful barrier that will frustrate even the most obstinate thieves. ghost installer is why more insurance companies are recommending or even requiring ghost immobilisers to be installed, since they can drastically reduce monthly premiums.
Making Connections
Ghost immobilisers are completely silent unlike traditional security systems, which can be heard by thieves. They stop thieves from knowing that your car is on. They also prevent high-tech methods of stealing vehicles like OBD hacking. Installing them without leaving permanent marks on your car is an excellent alternative for those planning to sell the vehicle in the near future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and modern solutions to protect your car from theft. It shuts down your engine by using the CAN data network and generates a unique PIN code which is difficult to steal from criminals. It can be used in many different automobiles, and it can work with a variety of features already installed including car alarms, steering wheel locks, GPS trackers and door lock bypass.
If ghost 2 immobiliser review decide to install an Ghost immobiliser for your vehicle, be sure you refer to the wiring diagram to determine the wires to connect. Make sure to double-check the location of these wires to ensure their accuracy and mark them using tape or labels to make it easier to keep the track of them. It is also necessary to locate a reliable power source (12V) for the system, as well as the grounding. Once these are in place, you can begin to connect the components to complete the installation.
When the ghost immobiliser is connected to your CAN bus it will stop your vehicle from starting until you enter a pin number using the buttons on the dashboard or the steering wheel. This will stop ECU cloning and other methods of theft of vehicles. It can also be used with other Thatcham approved security equipment like alarms or tyre clips to provide your vehicle with an even higher security level.
As the UK automotive aftermarket market continues to grow, so are the options for securing your vehicle. With so many ways for thieves to gain access and steal your car it's crucial to do all you can to prevent it from being stolen. Ghost immobilisers are an increasingly popular option for car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU which stops the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to copy your key fob and start your vehicle, and more difficult to disable the system by hacking into its electronic components.
Ghost Immobilisers can also be utilized together with GPS tracking devices that will help you track your vehicle's location and identify it if it's stolen. This isn't an everyday feature in security products that are available from the market however it's a great method to enhance your security and give you peace of mind knowing that your vehicle is always protected.
In addition to providing enhanced security and security, the Ghost-II immobiliser provides a simple user experience by removing the requirement for additional key fobs and devices. It is simple and intuitive PIN code entry that can be integrated seamlessly into your daily routine. It also has convenience features and deactivation settings that let you temporarily disable the immobiliser to valet park or service your vehicle.
Prepare the necessary tools and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will allow you the flexibility to make precise connections and a multimeter is a great tool to determine electrical values. Insulation tape and heat-shrink tubing is essential to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It's also important to work in an area that is well-lit, and wear safety equipment when working with electrical components and tools.
You should test the Ghost immobiliser after you have completed the installation to ensure it is working properly. You should first try to start the vehicle without entering the PIN. If this doesn't work then you'll have to retest and inspect the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a hidden device which cannot be identified by thieves. It is also far more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA approved and recognised by a few insurance companies, making it a cost-effective investment that will give you the peace of mind that you want.