Ghost Immobiliser Fitting
Protect your vehicle from theft of keys, cloning and hacking with the first aftermarket CAN immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser, which will send you alerts when your car is taken or damaged.
The installation of an Ghost immobiliser is done by a qualified technician. Making use of the correct tools, insulation tape and heat shrink tubing is crucial.
Getting Started
Ghost immobilisers are an excellent alternative to physical theft protection devices such as wheel locks and car alarms. They safeguard your vehicle without the use of LED indicators or key fobs. They are directly connected to the ECU CAN data network, and are activated only after entering a PIN. This gives a greater level of security against key hacking, ECU swapping and cloning.
In the end, installing a ghost immobiliser Birmingham has to be done with a high degree of agility and accuracy. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's circuits. To avoid this, it's crucial that you know the installation process and prepare your vehicle accordingly.
First, you need to prepare the vehicle by removing interior panels to make room for the immobiliser device. Once you've found the perfect place to conceal it and secure it with cable ties to keep it from being taken away or tampered with. Next, tidy up the wiring by tying loose wires and utilizing insulation tape or heat shrink tubing to cover the exposed connections. This will reduce the risk of a short circuit that is not intended to happen while also improving the appearance and reducing the chance of theft.
Find a source of constant 12V power and an earthing point for the ghost immobiliser. Once you have located them test the power cables with a multimeter. Connect the CAN H & the CAN L wires from the immobiliser to the grounding and power points.
Once you've made all of the connections required It's crucial to double-check the connections and check the immobiliser for indications of corrosion or damage. By entering a PIN and then starting the car is a good method to test the system. This should be part of your daily routine since it allows you to identify any issues that are intermittent early. Regular testing also helps to improve the longevity of the device and ensure that it is functioning at its best.
Preparing your vehicle
The installation of an Ghost immobiliser is a complicated task that requires tools and expertise. A wiring diagram is essential to identify the right wires, establishing precise connections and ensuring security. A multimeter is a tool to test the electrical properties and ensure security. Insulation tape and cable tie can be used to secure the connections and shield them from tampering. Additionally, a user's guide will provide specific directions specifically tailored to the Ghost Immobiliser model you have.
Once installed ghost installation can stop engine starts that are not authorized by requiring the driver to input a unique code sequence using the buttons on the console or the steering wheel. This can be accomplished manually or remotely via the mobile phone app and the code can be changed by the vehicle owner at any time. The device is also quiet and undetectable by thieves, since it doesn't emit radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and shuts down the engine if a false signal is detected. The system is tamper-proof as well as weatherproof, but it does not have key fobs or LED indicators to attract the attention of thieves.
It can be placed behind the dashboard or in an inconspicuous area, so it isn't visible to thieves and does not hinder the vehicle's performance. It can be placed in a small container so it is less likely to be noticed by unscrupulous salespeople during a test-drive.
Its low-profile operation and integration with the vehicle's CAN bus system make it an effective deterrent against modern methods of theft, such as key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier that can deter even the most persistent thieves. This is why more insurance companies are advocating or even requiring ghost immobilisers to be fitted, as they can drastically reduce monthly premiums.
Making the Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers operate in a quiet manner to keep them from being aware that your vehicle has been turned on. They also prevent high-tech methods of stealing vehicles, like OBD hacking. They can also be installed without causing permanent marks in your vehicle making them a good option for those who are planning to sell their car in the near future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and current solutions to protect your car from theft. It uses the CAN data network to deactivate your engine and generates a pin code that only you know, which means it is difficult for thieves to identify. It can be installed in a variety of vehicles and is compatible with a variety of available features, including car alarms and GPS trackers and steering wheel locks and door lock bypass systems.
If you choose to use a Ghost immobiliser for your vehicle, be sure to refer to the wiring schematic to identify the wires to connect. Verify their positions to ensure they're exact, and label them or tape them to help you keep track of them. You will also have to locate a reliable power source (12V) for the system as well as a grounding. Once these are in place, you are able to begin to make the connections needed to complete the installation.
The ghost immobiliser won't allow your vehicle to start unless you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU cloning and other methods of vehicle theft. Additionally, it can be combined with other Thatcham-approved security equipment, such as alarms and tyre clamps, to provide your vehicle with an even greater degree of security.
As the UK automotive industry continues to grow and so do the options for protecting your vehicle. There are many ways for thieves to get into your car and steal it, so it's important to do everything you can to prevent it from being stolen. Ghost immobilisers have become an increasingly popular option for car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it extremely difficult for thieves to steal your key fob and start your vehicle, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to assist you to locate your vehicle if it is stolen. This feature isn't often found in aftermarket security products, but it is an excellent option to boost the security of your vehicle and give you peace of peace of.
The Ghost-II immobiliser is not just a source of an enhanced security, but also provides a more convenient experience for the user by not having to use additional key fobs or devices. It comes with an easy and intuitive PIN code entry system that is seamlessly integrated into your daily routine. It also comes with convenience features and deactivation options that let you temporarily disable the immobiliser to valet park or service your vehicle.
Before beginning the installation process, be familiar with your vehicle's wiring and prepare the necessary tools. A basic set of tools can allow you to create precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat-shrink tubing is essential to protect connections from short circuits. Cable ties can also be used to secure wiring. It's also important to work in an area that is well-lit, and wear protective gear when working with electrical tools and components.
You should test the Ghost immobiliser after you have completed the installation to ensure it is working properly. First, you should try to start the vehicle without entering the PIN code. If this fails then you'll have to retest and inspect the connections more thoroughly.
In contrast to other security systems unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than conventional physical deterrents like wheel clamps or steering locks. It is TASSA-approved and recognized by some insurance companies. This makes it a cost-effective investment that gives you the peace of mind you deserve.